pharma@sz-pharma.com    +86-18241958031
Cont

Have any Questions?

+86-18241958031

Stainless Steel Fume Hood
video
Stainless Steel Fume Hood

Stainless Steel Fume Hood

Fume hood, also known as exhaust cabinet, is an indispensable and important safety equipment in the laboratory, mainly used to capture, contain, filter or discharge pollutants such as harmful gases, steam, smoke, dust and particulates generated during the experiment, so as to protect the health of laboratory personnel and maintain the air quality of the laboratory.
Send Inquiry

Product Introduction

 

Suzhou Pharma Machinery supplies you with the optimal Stainless Steel Fume Hood!

 

11111.jpg

Product Introduction

 

What is a fume hood?

A fume hood is a common safety ventilation device found in laboratories and cleanrooms, used to remove hazardous gases, fumes, vapors, and particulates from the work environment.

A fume hood typically consists of a cabinet with a removable sash or window at the front, allowing the user to adjust the opening size as needed. The fume hood typically contains a work area for chemical reactions, mixing, or other processes that may produce hazardous substances. Air within the fume hood is exhausted to a safe location through a duct system, sometimes filtered and purified, or directly discharged outside the safe area.

 

Application scenarios:

(1) Scientific research industry: chemical laboratories, biological laboratories, material laboratories, and other scientific research sites.

Special needs: need to handle flammable and explosive reagents, volatile toxic substances, extremely high requirements for personnel safety and experimental accuracy, extremely high requirements for explosion protection, need to handle organic solvents, etc.

(2) Chemical industry: R&D laboratories of petrochemical, fine chemical, pesticide production and other companies

Special needs: need to deal with highly corrosive chemicals and prevent flammable and explosive accidents

(3) Electronics field: semiconductor workshops, chip laboratories, electronic materials R&D centers

Special needs: need ultra-clean environment, anti-static, anti-dust

(4) New material research and development: nanomaterials, composite materials, new energy materials, and laboratories

Special needs: need to handle special gases, extremely high explosion-proof requirements

(5) Medical field: hospital laboratory, disease control center, pharmaceutical companies

Special needs: biosafety protection, prevention of cross-infection

 

Materials and performance

We will recommend suitable materials based on different customer requirements, such as materials that can withstand strong acids and alkalis, high-intensity corrosion, and those that are resistant to pathogenic or toxic-uncertain chemicals and organisms during operation.

The currently mainstream recommended materials are:

(1) PP (Polypropylene)

(2) 304 stainless steel/316 stainless steel

(3) Galvanized steel plate (epoxy spray)

 

Products Pictures

 

Lab Steel Fume Cupboard
 
Chemical laboratory fume hood
 
customized fumehood cupboard
 
wholesale certificated fume hood
 

 

Suzhou Pharma OEM/ODM custom options

 

Material

galvanized steel, PP, SS304, SS316 (custom thickness)

Full set explosion-proof configurations

explosion-proof fan, explosion-proof motor, explosion-proof switch, explosion-proof socket, explosion-proof glass, explosion-proof LED lamp, explosion-proof UV lamp

Table

stainless steel/phenolic table/epoxy resin table/ceramic table/granite table

Sliding wheel

equipped with brake device, easy to move and stable positioning

Air filter

primary efficiency/medium efficiency/high efficiency/activated carbon

Sprayable anti-corrosion material

Differential pressure gauge

Negative pressure design

Sink, faucet, gas valve, air valve

Flue pipe, elbow

LCD Display Control System/LED Display Control System

 

Why choose Pharma

 

Strict quality control system. Each device can be shipped only after passing multiple rigorous tests, including:

(1) Continuous operation test: Simulate extreme working conditions to test the durability of the equipment

(2) Air tightness test: use smoke test and pressure decay method for double inspection to ensure no leakage

(3) Explosion-proof performance verification: pass various explosion-proof qualification certifications, quality assurance

(4) Wind speed uniformity test: ensure that the wind speed at each point on the working surface is stable and accurate

(5) Noise test: ensure that the operating noise is less than 65 decibels

(6) Vibration test: test the smooth operation of the equipment

 

Product Parameter

 

Product name

Stainless Steel Fume Hood

Window

6mm thickened tempered glass

Window opening range 0-800 mm
Average surface wind speed

0.5 m/s

Discharge speed

0.3-0.6 m/s adjustable

Lighting

20W × 1, at least 400 lux

Socket

1.5 amp socket, 3 pcs

Noise

≤ 65 dB

Large storage space under the operating area to meet the storage needs of medical samples and reagents.

The movable lintel can adjust the opening to adapt to different experimental conditions.

The large working area provides sufficient operating space for precision instruments to ensure experimental accuracy.

Anti-static design, surface resistance <10^6Ω, to prevent static damage to precision components.

The manual sliding door has a limit structure and an over-limit alarm function.

 

Product Installation

 

(1) Shipping the fume hood in a completely disassembled manner can save transportation costs, but increase the assembly process. We will provide an installation video.

(2) Shipping the fume hood in two parts (upper and lower sections) reduces assembly difficulty and avoids potential oversize shipping restrictions for extra-tall units during ocean freight.

(3) Shipping the fume hood fully assembled requires no assembly on your end, but comes with higher shipping costs.

 

Product FAQ

 

Q: What is the safe wind speed of the fume hood? How to test?

A: The standard working surface wind speed is 0.4-0.6m/s. Testing method: Use an anemometer to measure 9 points evenly at the operating port, and the fluctuation must be ≤15%.

Q: Can a stainless steel fume hood be used for hydrochloric acid experiments?

A: No! The chloride ions in hydrochloric acid corrode stainless steel, so a PP fume hood should be used. Stainless steel is only suitable for weak acids such as nitric acid and acetic acid.

Q: How can I fix excessive fume hood noise (>65dB)?

A: Solutions: ① Check the lubrication of the fan bearings ② Install a silencer duct ③ Replace the variable frequency motor.

Q: How can I repair scratches in a PP fume hood?

A: Use a PP welding rod to fill the scratches with hot air, then polish and smooth them. Deep scratches require panel replacement.

Q: Are fume hoods and biosafety cabinets interchangeable?

A: No! Fume hoods only exhaust exhaust, while biosafety cabinets protect personnel, samples, and the environment (biosafety cabinets are required for cell culture).

Q: What is the correct posture when using a fume hood?

A: Recommendation: Open the door 10-15 cm from the work surface to maintain ventilation. Avoid putting your head inside the door. Lower the door to its lowest position after the experiment.

Q: Can items be stored inside the fume hood?

A: Long-term storage of flammable, explosive, or toxic substances is not recommended. Essential items should be placed to the left and right sides, away from sources of contamination, and should not obstruct the opening and closing of the adjustable door or block airflow.

Q: How should I clean the fume hood after the experiment?

A: Turn off the power to the equipment inside the fume hood, turn off the water, electricity, and gas, lower the adjustable door to its lowest position, and ventilate for 5-10 minutes before leaving.

 

Qualification certification

Certifications

Including: explosion-proof certificate, international test report, CE certification, RoHS certification, American standard certification, European standard certification, national standard certification, production safety license, medical device license...

modular-1
modular-2
modular-3
modular-4
modular-5
modular-6
 

 

MORE CASES OF PHARMA CLEAN

Hot Tags: stainless steel fume hood, China stainless steel fume hood manufacturers, suppliers, factory

Send Inquiry

(0/10)

clearall