iso 6 cleanroom standards
In iso 6 cleanroom standards for microelectronics and pharmaceutical production, various acidic and alkaline substances, organic solvents, general gases, and specialty gases are often used or generated during the product production process; In the production process of allergenic drugs, certain steroid drugs, highly active and toxic drugs, there may be corresponding harmful substances discharged or leaked into the clean room. Therefore, for the production process equipment or processes that may discharge various harmful substances, gases or dust in the clean room for the production of the above products, local exhaust devices or whole room exhaust devices are installed. According to the type of exhaust gas discharged during the production process, the exhaust devices (systems) can be roughly divided into the following types.
When various organic substances and solvents are used as raw materials or cleaning agents in product production, iso 6 cleanroom standards will emit gases of organic substances and solvents in relevant places or equipment. Exhaust devices should be installed in such places or equipment. In general, the concentration of organic gases in organic exhaust systems is very low. If it can meet the national standard for atmospheric emissions, it can be directly discharged into the atmosphere without the need for exhaust gas treatment equipment; When the concentration of organic gases in the exhaust system exceeds the specified limit, an organic gas treatment device should be installed, and only after reaching the standard can it be discharged into the atmosphere. The purification treatment of organic exhaust includes activated carbon adsorption method, liquid absorption method, catalytic combustion method, etc. Activated carbon adsorption is mainly used for the treatment of benzene and gasoline organic exhaust with small and medium flow rates that do not contain dust or adhesive substances; Liquid absorption method, with simple equipment and low energy consumption, but low absorption efficiency; Catalytic combustion method is mainly used for the treatment of high concentration organic exhaust gases such as benzene, alcohols, lipids, gasoline, etc. Organic gas treatment equipment should be selected according to the type and concentration of organic substances contained in the iso 6 cleanroom standards exhaust system
|
project |
iso 6 cleanroom standards | ||
|
air clean class |
Class 100000 ISO8 |
||
| air cleaning | H14 high effect air filter | ||
| air flow | 18000m3/H | ||
| control humidifier | 60% | ||
| control temperature | 22℃ | ||
| wall and ceiling | 50mm thickness PU sandwich panel | ||
| project standard | GMP ISO EU | ||
| used for | plant drying room | ||
Company profile




Hot Tags: iso 6 cleanroom standards, China iso 6 cleanroom standards manufacturers, suppliers, factory






