1.Primary filter: It is the primary filter of the air conditioning system, mainly used to filter dust particles larger than 5um. There are three styles of primary filters: plate type, folding type, and bag type. The function of the primary filter is to have a large pleated filtering area, ensuring the fresh air flow while effectively filtering out large particles, dust, mosquitoes, hair, and other substances in the outdoor air entering the room.
Replacement cycle: Three to four months, determined based on the air quality of the location of use.
Medium efficiency filter: Medium efficiency filters belong to the F series of air filters, which are divided into bag type and non bag type. Bag type filters include F5, F6, F7, F8, F9, Non bag filters include FB (plate type medium efficiency filter), FS (partition type medium efficiency filter), FV (combination type medium efficiency filter)
Common symbols
F5, F6, F7, F8, F9 are filtration efficiencies (colorimetric method).
F5:40~50%;
F6:60~70%;
F7:75~85%;
F8:85~95%;
F9:99%.
Application: Mainly used for intermediate filtration in central air conditioning ventilation systems, pharmaceutical, hospital, electronics, food, and other industrial purification applications; It can also be used as a front-end filter for efficient filtration to reduce the load of efficient filtration and extend its service life;
Due to its large windward side, it has a high amount of dust and low wind speed, and is considered the best medium efficiency filter structure currently available.
characteristic:
1. Capture particles of 1-5um dust and various suspended solids.
2. Adopting hot melt technology, the structure is stable and the risk of leakage is reduced.
3. The air volume is high.
4. Low resistance.
5. High dust holding capacity.
6. Can be cleaned and reused repeatedly.
7. Type: Frameless and Framed Bag.
8. Filter material: special non-woven fabric or fiberglass.
9. Efficiency: 60%~95% @ 1~5um (colorimetric method).
10. Maximum temperature and humidity used: 80 ℃, 80%.


2.High efficiency filter: mainly used to capture particles, dust, and various suspended solids below 0.5um, as the end filter of various filtration systems. Using ultra-fine glass fiber paper as filter material, folding materials such as adhesive paper and aluminum foil as dividing plates, sealing with a new type of polyurethane sealant, and made of galvanized sheet, stainless steel sheet, and aluminum alloy profiles as outer frames.
The function of high-efficiency filter: The high-efficiency filter is installed on the top floor of the fresh air purifier. After the outdoor fresh air is filtered layer by layer through the primary filter, EPIC low-temperature plasma electrostatic module, and negative ion module, all remaining harmful particles are removed by the high-efficiency filter.
Replacement cycle: One to two years, determined based on the air quality of the location of use.
The function of the primary filter is to have a large pleated filtering area, ensuring the fresh air flow while effectively filtering out large particles, dust, mosquitoes, hair, and other substances in the outdoor air entering the room.
Replacement cycle: Three to four months, determined based on the air quality of the location of use.
Suzhou Pharma Machinery Co.,Ltd.
2025/01/20
Gino




