When entering the air shower room, be sure to wear clean clothes as much as possible. The design of clean clothes is simple, without too many wrinkles and gaps and easy to blow. The blowing effect of ordinary cotton and linen clothes is not as good as that of clean clothes. At the same time, it is best to equip a series of protective equipment such as clean shoes, hats, gloves and masks. Personnel are not allowed to bring any personal goods into the air shower room. Raise your hands when blowing to avoid dead corners. Whether entering or leaving the air shower room, make sure the door is closed. Leave the air shower room as soon as possible after the air shower time is over.
The air shower nozzle, air outlet and return air outlet should be checked and cleaned regularly, and there should be no blockage to ensure normal operation. The filter should also be checked regularly, even if it is cleaned and replaced to avoid affecting the filtering effect. Keep the air shower room in a dry and ventilated environment.
The common faults of air shower room are as follows. First is the fan does not work. When this happens, you can check whether the one-button emergency switch is turned off. Second is the wind speed decreases. This may be a problem with the power supply or circuit. It is usually set at the factory. If there is a power problem, it is recommended not to repair it yourself. You must confirm with the manufacturer first. The wind speed decreases may also be caused by the filter being used for too long and dust accumulation causing the filter to be blocked. It can be cleaned or replaced. Third is cannot be automatically blown. When this happens, it is usually a problem with the induction system. You can check whether the circuit connection of the induction system is normal.


Suzhou Pharma Machinery Co.,Ltd.
2025/01/27
Icey




