pharma@sz-pharma.com    +86-18241958031
Cont

Have any Questions?

+86-18241958031

Nov 04, 2024

Cleanroom Testing Introduction

Clean rooms need to be inspected during the design process and after construction to ensure that the clean room can operate smoothly and safely. Here are the items that need to be inspected.

1. First, check the appearance of the clean room. Whether the walls and ceilings are installed flat. Whether the air conditioning unit and air duct are installed firmly, whether the sealing is good, and whether there is any deviation in the pipeline connection. Whether the air shower room transfer window, high-efficiency filter, etc. are installed firmly. Check whether the door switches smoothly and whether the door locks can be locked and unlocked normally. Detect the suspension in the air in the clean room. Clean rooms are divided into levels 1 to 9 according to the number of suspended particles per cubic meter. The number of particles in the air can be checked by dust particle counters and other related equipment to check whether the clean room meets the grade requirements

2. Check the temperature and humidity control system. The normal temperature in the clean area is 18-26 degrees, and the normal humidity is 45%-65%. If there are special requirements, they should meet the requirements before they can be put into use.

3. Check whether the installation positions of the air supply, return and exhaust vents are appropriate, check the air volume in each room in the clean room, and calculate whether the ventilation frequency can maintain the circulation and cleanliness of the clean air.

4. Close all doors and windows in the clean room and use a differential pressure meter to detect the pressure difference. The correct differential pressure can ensure the flow direction of the clean room air and prevent the abnormal transmission of air in the clean area and non-clean area from causing environmental pollution.

5. The noise range in the clean room in a fully enclosed state is about 60-65, ensuring that work in the clean room is not disturbed.

Check the lighting brightness in the clean room. The light should radiate to any position in the clean room, and the light source should be stable, soft, and without ghosting.

12

 

Suzhou Pharma Machinery Co.,Ltd.

2024/11/04

Icey

Send Inquiry