1. Personnel management. Personnel are the biggest source of contamination in cleanrooms, requiring improved cleaning and disinfection processes and optimized aseptic techniques. Personnel entering clean areas must wear clean, sterilized, and intact cleanroom garments, while minimizing unnecessary personnel movement to prevent cross-contamination.
2. Filter maintenance. High-efficiency particulate air (HEPA) filters can filter over 99.97% of particles smaller than 0.3 microns, but their efficiency decreases over time. Compared to periodic replacement, the equipment control system can predict filter lifespan, monitor fan malfunctions and provide early warnings, and improve maintenance accuracy by combining environmental parameters and equipment maintenance records.
3. Environmental monitoring (differential pressure control). The static pressure difference between clean and non-clean areas must be ≥10 Pa, and the pressure difference between areas of different cleanliness levels must be ≥5 Pa. An online monitoring system can monitor temperature, humidity, pressure difference, particle count, and microbial concentration in real time. The system automatically alarms when data is abnormal, achieving efficient real-time monitoring.
4. Cleaning and disinfection. Different colored cleaning tools should be used for areas with different cleanliness levels to prevent cross-contamination; disinfectants with different compositions should be rotated regularly to avoid microbial resistance; and the ATP biofluorescence detection method should be used to quickly assess the cleanliness of surfaces after cleaning.
5. Data management and tracking records. A production management system is used to achieve a closed-loop data chain throughout the entire process. Each operation has a clearly defined responsible person and timestamp, and all changes are recorded throughout the process, making them traceable and easy to quickly identify the relevant batches of problematic products and the responsible persons.
Energy consumption management. Cleanrooms have high energy consumption. Variable frequency controllers can be used to adjust the number of operating equipment according to the actual load, achieving energy savings of 15%-25%; heat recovery devices are installed to ensure a waste heat recovery utilization rate of ≥60%; and a MAU+FFU+DCC dry and wet separation air conditioning system is used, which can save more than 30% of energy during transitional seasons.


Suzhou Pharma Machinery Co.,Ltd.
2026/03/25
Icey




