The full name of FFU is Fan Filter Unit, which is usually used in clean rooms, modular clean rooms, clean workbenches and other places. It can be used alone or in combination with multiple others to form a modular purification area. Its working principle is to evenly remove the filtered clean air after the external non clean air passes through the filter. Usually there are primary filters, medium filters and high-efficiency filters, and the air supply speed is mostly 0.45 m/s.
The composition and installation method of laminar flow hood are different from FFU. The laminar flow hood can be suspended at the top of the ceiling or supported by ground brackets, and the composition is more complex than FFU, including the main box of the laminar flow hood, fan, air filter, damping layer. It can be used alone or in combination with multiple units, which is the same as FFU. The working principle of laminar flow hood is to send the clean air through the fan into the high-efficiency air filter, and then achieve uniform pressure through the damping layer, so that the clean air can enter the working area uniformly and vertically.
FFU is just a device for air purification, while laminar flow hood can replace cleanrooms in a sense. When the budget is low, the installation space is small, and only the cleanliness of the local area is required, laminar flow hoods can be used with soft wall to establish low-cost movable clean rooms.




Suzhou Pharma Machinery Co.,Ltd.
2024/12/13
Icey




