There are four levels of biosafety, P1, P2, P3 and P4. P1 refers to ordinary harmless bacteria and viruses; P2 refers to general pathogenic bacteria and viruses; P3 refers to infectious but curable bacteria and viruses; P4 refers to deadly bacteria and viruses that are not easy to cure after infection.
To achieve these biosafety levels, biosafety cabinets are also divided into different grades:
Class I biosafety cabinets can only protect personnel, not internal items. Class II biosafety cabinets can protect both personnel and internal items. Class II biosafety cabinets can be divided into Class II type A1, Class II typeA2, Class II type B1 and Class II type B2. Class II biosafety cabinets is the most popular type on the market. Class III biosafety cabinets are currently the biosafety cabinets with the highest protection level. It adopts a fully enclosed mode and is operated through isolation gloves. It is suitable for high-risk biological experiments and is essentially the same as isolator.



The installation of the biosafety cabinet is also very important. In order not to affect the movement of airflow, avoid installing the biosafety cabinet in a location with a large crowd. Reduce unnecessary personnel flow. It is best not to place the biosafety cabinet close to the ceiling, and leave 30-50cm of space for cleaning and replacement of the filter. A proper distance should be left on the back and left and right sides of the biosafety cabinet for daily maintenance and cleaning. Items needed during the working hours of the biosafety cabinet should be placed in the biosafety cabinet in advance to avoid frequent entry and exit of items. Try not to place tools and equipment, with vibration functions in the biosafety cabinet to prevent vibration from affecting the movement of airflow, and to prevent dust particles attached to the filter from falling off due to vibration and causing secondary pollution.
Suzhou Pharma Machinery Co.,Ltd.
2025/03/14
Icey




