
1. Personnel operation standards
1.1 Correct entry: When entering the air shower room, you should pass slowly, avoid running quickly or moving significantly, and prevent external dust from entering the air shower room or raising dust indoors. Before starting the air shower program, ensure that the door is completely closed.
1.2 Standing posture: Personnel should stand in the designated position of the air shower room, keeping their bodies upright, arms naturally hanging down, lifting their heads, not covering the nozzle, and ensuring that all parts of their bodies are exposed to the air.
1.3 Air shower time: Air shower should be carried out according to the set air shower time, generally between 30 seconds and 2 minutes, and the specific time can be adjusted according to the actual situation. Do not arbitrarily shorten the air shower time to ensure purification effect.
1.4 Prohibited behaviors: Smoking, eating, playing, and other behaviors are prohibited in the air shower room to avoid polluting the environment or affecting the effectiveness of the air shower. Do not open the door during the air shower to prevent external air from entering and damaging the purified environment.

2. Equipment maintenance and upkeep
2.1 Regular cleaning: Regularly clean the dust and debris in the air shower room, especially the surface of the return air outlet and high-efficiency filter. You can use a clean damp cloth to wipe indoor walls and nozzles, but be careful to avoid water entering electrical equipment components.
2.2 Filter replacement: The high-efficiency filter is a key component of the air shower room and needs to be regularly checked for its filtration effect. When the resistance of the filter reaches a certain level or the usage time reaches the specified period (usually 1-2 years), the filter should be replaced in a timely manner to ensure the purification efficiency of the air shower.
2.3 Fan inspection: Regularly check the operation of the fan, including its speed, air volume, etc. If abnormal noise or significant reduction in air volume is found in the fan, the cause of the malfunction should be investigated in a timely manner, and the fan should be repaired or replaced.
2.4 Electrical system maintenance: Regularly inspect the electrical system of the air shower room, including wires, sockets, switches, etc., to ensure that the electrical connections are firm and there are no safety hazards such as leaks or short circuits. If electrical faults are found, they should be repaired by professionals.
2.5 Door maintenance: Check the sealing performance of the air shower door to ensure that there are no gaps when the door is closed, preventing external air from entering. At the same time, it is necessary to check whether the door switch is flexible. If there is any blockage or abnormality, it should be promptly debugged and repaired.
3. Environmental requirements
3.1 Temperature and Humidity: The air shower room should be installed in an environment with a temperature of 5 ℃ -40 ℃ and a relative humidity of 30% -85%, avoiding use in high temperature, high humidity or low temperature environments to avoid affecting the performance and service life of the equipment.
3.2 Installation location: The air shower room should be installed at the entrance of the clean room or clean area, and the surrounding environment should be kept clean to avoid installation in areas with high dust, corrosive gases, or poor ventilation.
3.3 Avoid vibration: The ground where the air shower room is installed should be flat, and the equipment should be protected from vibration and impact, otherwise it may cause internal components of the equipment to loosen, affecting normal operation.
Only by using and maintaining the air shower room correctly can its good purification effect be guaranteed, providing reliable assurance for the clean room.
Suzhou Pharma Machinery Co.,Ltd.
2025/10/06
Alice




